SANSI 30W (250W Incandescent Equivalent) LED Security Motion Sensor Outside Light
Compared with other security lights, this LED security motion activated light will also be rated at 3000lm just with 30W, which is far brighter to provide security for your home or business accommodations. You need to cut down your electricity bill by up to 88% by replacing 250W incandescent bulb with 30W SANSI LED light!
3 Different Sensing Modes:
Set-up: Put the ON-TIME switch at the bottom of the sensor in the TEST position.
Function: When people or every other living objects pass through the induction zone, the light turns on for 5 seconds mechanically. Test Mode helps you realize whether the motion sensor is working well.
MOTION SENSOR MODE(Working Mode)
Set-up: Put the ON-TIME switch in the 1, 5, or 10 minutes position.
Function: Motion Sensor Mode only works at night. If people or every other living objects pass through the induction zone, the light will be on mechanically for 1, 5, 10 minutes chosen.
MANUAL MODE (Working Mode)
Set-up: Flip the light switch off for one second then back on to toggle between AUTO and MANUAL mode.
Function: Under Manual Mode, the light might be on at night for 6 hours.
*Note: Manual mode only works at night and with the ON-TIME switch in the 1, 5, or 10 minutes position.
180° Wide Sensing Range
The sensing light angle of SANSI LED Security Motion Light can reach 180° wide sensing range and max 50ft motion coverage. The advisable installation height is 3.2~13.1ft.
Villas, Garages, Gardens, Courtyards, Doorways, or every other areas need mechanically lighting in the darkness
The waterproof IP Rating of Security Light is IP65, which is in a position to offer protection to against low-pressure water jet spray. But it can not be put under the water.